HNSC-D-02
Function: The tilt switch HNSC-D-02 measures tilt deviations from the horizontal in 2 axes (x-axis, y-axis). If a deviation occurs on an axis that exceeds the set ON switching point, the respective switching output switches to high level, and the corresponding indicator LED signals the switching state. The switch distinguishes between positive deviation and negative deviation.
In the case of positive deviation, the respective output XS+/ YS+ switches, while in the case of negative deviation, the respective output XS-/ YS- switches.
The switching output only returns to low level when the deviation falls below the switching point.
The switching hysteresis between the ON and OFF switching points can be adjusted via the potentiometer P1 between approximately 0.05° and 2°. The cutoff frequency can be adjusted via the potentiometer P2 between approximately 2 Hz and 50 Hz.
Measuring range X-axis:
Measuring range Y-axis:
Switching point X-axis:y
Switching point Y-axis:y
Calibration accuracy of
Zero point:
Calibration accuracy of
Switching points:
Resolution:
Hysteresis:
Cutoff frequency:
Measuring principle:
-90°…+90°
-90°…+90°
0° < φx < 45°; adjustable
0° < φy < 45°; adjustable
line
+/- 0.05°
line
+/- 0.05° + 1% of the switching range
0.025°
≈0.05°…2.00°, adjustable
≈2…50 Hz, adjustable
MEMS
Housing material:
Dimensions:
Aluminum
64 x 58 x 34 mm
Operating voltage UB:
Ripple voltage:
Current consumption, no load:
Switching output:
Output voltage:
Max. output voltage:
line
Connection:
9-28 VDC
< 10 %
< 40 mA
open collector (NC)
> Vs -1.5V
250 mA per output
500 mA max output load (all outputs simultaneously)
Round connector M12, 8-poleg
or: Shielded cable, 6-core (upon request)
EU Directives:
.
Applicable standards:
2014/30/EU EMC Directive,
2011/65/EU RoHS Directive
EN 61000-6-3:2007 + A1:2011/ AC:2012 (Emissions for residential, commercial, and light industrial areas),
EN 61000-6-2:2005 + AC:2005-09 (Immunity for industrial areas)
MTTFd:
Service life:
699 years
20 years
The specification of the MTTF/ service life value does not constitute binding quality and/or durability guarantees; it is merely based on experience without binding character.
These value specifications do not extend or otherwise influence the limitation period for warranty claims.