HNSC-D-01
Function: The tilt switch HNSC-D-01 measures tilt deviations from the horizontal in 2 axes (x-axis, y-axis). If a deviation occurs on one axis that exceeds the set warning switching point, the respective switching output switches to high level, and the corresponding indicator LED signals a warning. If a deviation occurs on one axis that exceeds the set alarm switching point, the respective switching output switches to high level, and the corresponding indicator LED signals an alarm. The switch does not differentiate between positive and negative deviations from the zero position.
The switching output only returns to low level when the deviation falls below the alarm or warning switching point. The switching hysteresis between the on and off points can be adjusted via the potentiometer P1 between approximately 0.05° and 2.00°. The cutoff frequency can be adjusted via the potentiometer P2 between approximately 2 Hz and 50 Hz.
Measurement range X-axis:
Measurement range Y-axis:
Switching point X-axis:y
Switching point Y-axis:y
Calibration accuracy of
Zero point:
Calibration accuracy of
Switching points:
Resolution:
Hysteresis:
Cutoff frequency:
Measuring principle:
-90°…+90°
-90°…+90°
0° < φx < 45°; adjustable
0° < φy < 45°; adjustable
.
+/- 0.05°
.
+/- 0.05° + 1% of the switching range
0.025°
≈0.05°…2.00°, adjustable
≈2…50 Hz, adjustable
MEMS
Housing material:
Dimensions:
Aluminum
64 x 58 x 35 mm
Operating voltage UB:
Ripple:
Current consumption, no load:
Switching output:
Output voltage:
Max. output voltage:
line
Connection:
9-28 VDC
< 10 %
< 40 mA
open collector (NC)
> Vs -1.5V
250 mA per output
500 mA max output load (all outputs simultaneously)
Round connector M12, 8-pole
or: Shielded cable, 6-core (upon request)
EU Directives:
Applied standards:
2014/30/EU EMC Directive, 2011/65/EU RoHS Directive
EN 61000-6-3:2007 + A1:2011/ AC:2012 (Emissions for residential, commercial, and light industrial environments),
EN 61000-6-2:2005 + AC:2005-09 (Immunity for industrial environments)
MTTFd:
Service life:
699 years
20 years
The specification of the MTTF/Service life value does not constitute binding quality and/or durability commitments; it is merely an empirical value without binding character.
These value specifications do not extend or otherwise influence the limitation period for defect claims.